Your .csv file should contain only a single column of TU ID numbers with a column header.
Name your file with the name of the bulk process you will be using. For example, SGPADVA, SGAMSTU, SFAMREG, etc.
If you need to do the process with different lists, it’s a good idea to add an identifier to differentiate them from one another.
For example, if you’re using SFAMREG to register student for different CRNs, you might use, SFAMREG_24679 (SFAMREG_CRN).
Ensure that the file type is .csv.
See an example
GJAJFLU: Upload your file
In the Job field, enter GJRPSIM. Go.
Click the Insert button.
Click the Select File button and choose your file from where you’ve saved it.
In the Delete After days field, enter 0.
Save.
Upon saving, you will see the following notifications. This is normal. Click the bell in the upper right corner and move on to the next step.
Create a Selection ID if needed
To create a new Selection ID:
Go to GLRSLCT. Enter STUDENT for the application.
In the Selection ID field, type in your preferred Selection ID. Go.
Our convention is to use the name the of the bulk process you’re using for this population selection and your initials or username. For example, “SGAMSTU_DK” or “SGAMSTU_DKIDD”.
Enter a description and check Manual. Our convention is to use the bulk process you’re using as the Description, and it’s suggested that you just repeat the Selection ID in this field.
Save.
GJAPCTL: Run the GJRPSIM process
In the Process field, enter GJRPSIM and REGGJRPSIM for the Parameter Set. Go.
Next block to Parameter Values. Enter the following parameters:
01 Application ID - STUDENT in all caps
02 Selection ID - your bulk process (SFAMREG, etc.)
03 Creator ID - DKIDD
04 - System Indicator - M
05 - Import Type - I
06 - File name - your file name
07 - Purge all records - N
08 - N
09 - N
Next block to Submission.
Save.
GLAEXTR: Review your list (optional)
In the key block confirm or enter the Application (STUDENT) and Selection ID. Go.
The Selection ID is the bulk process you’re using. For example, SGPADVA, SGAMSTU, SFAMREG, etc.
Enter your username as DKIDD.
You will see the list of students pulled in from your .csv file.
If you see the following warning, click OK.
Complete your bulk process
Navigate to your intended bulk processing screen. Set up the changes you want to make.
Add Comment